SPICELib.src.SOURCE

Name	Description
Stimulus
VSource
ISource
E
F
G
H

SPICELib.src.SOURCE.VSource

Parameters

Name	Default	Description
replaceable model TransientSpecification	WAVEFORMS.NULL
DC_VALUE	0	DC value
AC_MAG	0	AC magnitude value
AC_PHASE	0	AC phase value [deg]
HIDDEN_COMPONENT	false	Enable or disable log

Modelica definition

model VSource 
  extends Stimulus(redeclare type SignalType = SI.Voltage);
  // Contribution to the total power dissipation
  outer INTERFACE.PowerDissipation TotalPowerDissipation;
  INTERFACE.PowerDissipation powerDissipation;
  parameter Boolean HIDDEN_COMPONENT=false "Enable or disable log";
protected 
  SI.Current iAC_mag(start=0) "Magnitude of AC small-signal current";
  SI.Current iAC_mag_dB(start=0) "Magnitude (dB) of AC small-signal current";
  
  nonSI.Angle_deg iAC_phase(start=0) 
    "Phase (deg) of AC small-signal current";
equation 
  
  // DC contitutive relation
  0 = if ctrl_IS_inhibit then iDC else vDC - DCvalue;
  // Transient constitutive relation
  vTran = signalTran;
  // AC small-signal constitutive relation
  {vAC_Re,vAC_Im} = if ctrl_AC then {AC_MAG*cos(Deg2Rad(AC_PHASE)),AC_MAG*sin(
    Deg2Rad(AC_PHASE))} else zeros(2);
  (iAC_mag,iAC_phase) = Rect2Polar({iAC_Re,iAC_Im});
  iAC_mag_dB = Decibels(iAC_mag);
  // Contribution to the total power disipation
  when ctrl_log_DC then
    powerDissipation.dissipatedPower = vDC*(-iDC);
  end when;
  connect(powerDissipation, TotalPowerDissipation);
  // Log static analysis results
  when ctrl_log_DC and (HIDDEN_COMPONENT == false or LOG_RESULTS == 2 and 
      HIDDEN_COMPONENT == true) then
    LogVariable(iDC);
  end when;
  when ctrl_log_DC and (HIDDEN_COMPONENT == false and LOG_RESULTS > 0 or 
      HIDDEN_COMPONENT == true and LOG_RESULTS == 2) then
    LogVariable(powerDissipation.dissipatedPower);
  end when;
  // AC small-signal results
  when ctrl_log_AC and (HIDDEN_COMPONENT == false or LOG_RESULTS == 2 and 
      HIDDEN_COMPONENT == true) then
    LogVariable(iAC_mag);
    LogVariable(iAC_mag_dB);
    LogVariable(iAC_phase);
  end when;
end VSource;

SPICELib.src.SOURCE.ISource

Parameters

Name	Default	Description
replaceable model TransientSpecification	WAVEFORMS.NULL
DC_VALUE	0	DC value
AC_MAG	0	AC magnitude value
AC_PHASE	0	AC phase value [deg]

Modelica definition

model ISource 
  extends Stimulus(redeclare type SignalType = SI.Current);
equation 
  // DC constitutive relation
  0 = if ctrl_IS_inhibit then vDC else iDC - DCvalue;
  // Transient constitutive relation
  iTran = signalTran;
  // AC small-signal constitutive relation
  {iAC_Re,iAC_Im} = if ctrl_AC then {AC_MAG*cos(Deg2Rad(AC_PHASE)),AC_MAG*sin(
    Deg2Rad(AC_PHASE))} else zeros(2);
end ISource;

SPICELib.src.SOURCE.E

Parameters

Name	Default	Description
Gain	1

Modelica definition

model E 
  extends INTERFACE.TwoPort;
  parameter Real Gain=1;
equation 
  // Static Model
  iDC1 = 0;
  vDC2 = Gain*vDC1;
  
  //Transient Model
  iTran1 = 0;
  vTran2 = Gain*vTran1;
  
  //AC Model  
  iAC_Re1 = 0;
  iAC_Im1 = 0;
  vAC_Re2 = Gain*vAC_Re1;
  vAC_Im2 = Gain*vAC_Im1;
  
end E;

SPICELib.src.SOURCE.F

Parameters

Name	Default	Description
Gain	1

Modelica definition

model F 
  extends INTERFACE.TwoPort;
  parameter Real Gain=1;
equation 
  // Static Model
  vDC1 = 0;
  iDC2 = Gain*iDC1;
  
  //Transient Model
  vTran1 = 0;
  iTran2 = Gain*iTran1;
  
  //AC Model  
  vAC_Re1 = 0;
  vAC_Im1 = 0;
  iAC_Re2 = Gain*iAC_Re1;
  iAC_Im2 = Gain*iAC_Im1;
end F;

SPICELib.src.SOURCE.G

Parameters

Name	Default	Description
Gain	1	[S]

Modelica definition

model G 
  extends INTERFACE.TwoPort;
  parameter SI.Conductance Gain=1;
equation 
  // Static Model
  iDC1 = 0;
  iDC2 = Gain*vDC1;
  
  //Transient Model
  iTran1 = 0;
  iTran2 = Gain*vTran1;
  
  //AC Model 
  iAC_Re1 = 0;
  iAC_Im1 = 0;
  iAC_Re2 = Gain*vAC_Re1;
  iAC_Im2 = Gain*vAC_Im1;
  
end G;

SPICELib.src.SOURCE.H

Parameters

Name	Default	Description
Gain	1	[Ohm]

Modelica definition

model H 
  extends INTERFACE.TwoPort;
  parameter SI.Resistance Gain=1;
equation 
  // Static Model
  vDC1 = 0;
  vDC2 = Gain*iDC1;
  
  //Transient Model
  vTran1 = 0;
  vTran2 = Gain*iTran1;
  
  //AC Model  
  vAC_Re1 = 0;
  vAC_Im1 = 0;
  vAC_Re2 = Gain*iAC_Re1;
  vAC_Im2 = Gain*iAC_Im1;
end H;

SPICELib.src.SOURCE.Stimulus

Parameters

Name	Default	Description
replaceable model TransientSpecification	WAVEFORMS.NULL
replaceable type SignalType	Real
DC_VALUE	0	DC value
AC_MAG	0	AC magnitude value
AC_PHASE	0	AC phase value [deg]

Modelica definition

partial model Stimulus 
  extends INTERFACE.OnePort;
  replaceable model TransientSpecification = WAVEFORMS.NULL extends INIT.Part;
  extends TransientSpecification;
  // DC and AC analyses parameters
  parameter SignalType DC_VALUE=0 "DC value";
  parameter SignalType AC_MAG=0 "AC magnitude value";
  parameter nonSI.Angle_deg AC_PHASE=0 "AC phase value";
  
protected 
  SignalType DCvalue "DC analysis signal";
  SignalType signalTran "Tran analysis signal";
  // Time-related auxiliary variables
  SI.Time timeStartRampDC;
  SI.Time timeStartRampT;
equation 
  // DC-model signal
  when ctrl_DC then
    timeStartRampDC = time;
  end when;
  DCvalue = if (ctrl_DC or ctrl_AC) and ctrl_OP_mode == 0 and ctrl_OP_value == 
    0 then DC_VALUE else if ctrl_DC and ctrl_OP_mode == 0 and ctrl_OP_value == 
    1 then TRANS_INITIAL else if ctrl_DC and ctrl_OP_mode == 1 and 
    ctrl_OP_value == 0 then DC_VALUE*(time - timeStartRampDC)/TIME_SCALE else 
    if ctrl_DC and ctrl_OP_mode == 1 and ctrl_OP_value == 1 then TRANS_INITIAL*
    (time - timeStartRampDC)/TIME_SCALE else 0;
  // Transient-model signal
  when ctrl_Tran then
    timeStartRampT = time;
  end when;
  
  signalTran = if ctrl_Tran then signal else if ctrl_IS_TranOP and ctrl_OP_mode
     == 0 and ctrl_OP_value == 0 then DC_VALUE else if ctrl_IS_TranOP and 
    ctrl_OP_mode == 0 and ctrl_OP_value == 1 then TRANS_INITIAL else if 
    ctrl_IS_TranOP and ctrl_OP_mode == 1 and ctrl_OP_value == 0 then DC_VALUE*(
    time - timeStartRampT)/TIME_SCALE else if ctrl_IS_TranOP and ctrl_OP_mode
     == 1 and ctrl_OP_value == 1 then TRANS_INITIAL*(time - timeStartRampT)/
    TIME_SCALE else 0;
end Stimulus;

SPICELib.src.SOURCE.Stimulus.TransientSpecification

Parameters

Name	Default	Description
replaceable type SignalType	Real

Modelica definition

replaceable model TransientSpecification = WAVEFORMS.NULL extends INIT.Part;